Wholesale Uvled Curve Dry Screen Printing Ink Eco-Friendly Environmental

• Type: UV Ink
• Printing Type: Transfer Printing
• Ink Drying: Uvled Curing
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Ink
• Performance: Viscosity
• Component: Connection Material
• Transport Package: Carton
• Specification: 50*38*16
• Trademark: yincai
• Origin: China
• HS Code: 3215909000
• Production Capacity: 50000/Month
• Package Size: 50.00cm * 38.00cm * 12.00cm
• Package Gross Weight: 14.400kg

Product Description

UV LED Inks

UV LED inks differ from traditional UV free radical inks in their formulation. Special consideration of photoinitiators and pigments in the formulation must be made to match the spectral output of the LED lamps. These special photoinitiators absorb at a higher wavelength as opposed to traditional photoinitiators and are typically more expensive. The spectral output of a LED lamp to cure UV LED inks is very narrow, 365 - 405 nm, as compared to a UV mercury system which operates from 200 - 700 nm range.
 

UV LED Curing

Because of the limited spectral wavelength, UV LED primarily operates in the UV-A zone and considered to be 'safe' because it is closest to visible light. However, prolonged exposure to
this energy can be dangerous. The UV-B and much of the UV-C spectrums of light are primarily used for germicidal and
sterilization purposes. Light produced at these wavelengths are not only harmful to microorganisms, but are also dangerous to humans and other forms of life that may come in contact with it.
 

 

Applications

1. UV-A type devices have been traditionally used in applications such as counterfeit detection or validation (currency, identification documents, etc). The actual wavelengths used are in the 390 nm - 420 nm range. As a result, these type of LED's are readily available from a variety of sources and are considered the least expensive.
2. The middle UV-A LED area 350 nm - 390 nm are for curing both commercial and industrial materials such as adhesives, coatings and inks. There are many advantages over traditional curing technologies due to increased efficiencies and lower cost of ownership. Although the cost of this technology is greater, advances in manufacturing and demand are driving prices down.
3. The lower UV-A and upper UV-B ranges 300 nm - 350 nm are the most recent introduction to the marketplace. These units can be used in a variety of applications including UV curing and biomedical applications. There is

a significant overlap in all three of the UV spectrum ranges, so consideration must be made in what is best for the application.

1. The lower UV-B and upper UV-C ranges 250 nm - 300 nm, is still in it's early development stage. However, there is a great interest in these LED's in air and water purification systems.

 

1. More compact than mercury systems
2. Low voltage
3. No shutters or glass quartz
4. Consistent and immediate UV output over operating life
5. No UVC and therefore no ozone emitted, eliminating need for exhaust
6. Does not contain heavy metals (mercury)
7. Longer life, + 20,000 hrs as compared to 1,500 hrs on a standard UV mercury lamp
8. Easier to convert materials that are heat sensitive
9. LEDs are more efficient than mercury bulbs

Cost

UV LED inks and curing units are more expensive than current UV technologies. In the screen  printing  arena, UV LED curing is a standard on most UV platforms. Many press manufacturers now offer UV LED as an option if  a customer is purchasing a new press. For customers looking to take advantage of the latest technology, many UV LED manufacturers are offering retrofits to existing presses. UV LED curing solutions for both new and retrofit narrow web presses, offer higher yields and decreased operating costs for increased profitability.

Usage
Step 1, Clean the substrate and print it until dried.
Step 2, Mixing the reducer with ink 3% to 5%.
Step 3, Printing the ink with semi-automatic or automatic screen printing machine by 200mesh to 350mesh.
Step 4, Dry the printed object by UV-LED cured machine wave length 395um, power depend on the ink color and thickness.

Store

1. Keep dry and seal, stay far away from fire and heating.
2. Seal the package if could not use out in one time.
3. Due to sunlight and lamplight with UV, avoid light anytime and anywhere.

 

UV LED Benefits for Screen Printing
Features		Benefits
Color cured (no IR)		Allows printing on heat sensitive substrates
Long lifetime (>20,000 hours)		Lower operating costs, simplified maintenance
Air cooled		Simplified printer architecture, LED cure machine is independent with water cooling machine
Instant on/off		No (less) warm-up or cool down time, simplified mechanical design (no shutters)
Environmentally friendly		No Hg, Ozone, lower energy consumption
Simplified electronics		No high voltage ignition, reduced cost for printer electronics and shielding

 

YC Science & Technology Printing Co. Ltd was established in 2005 to help ten-thousands of Chinese and foreign enterprises to develop screen printing and water transfer process. We are located in Guangdong Shunde this rich land, is the high-tech enterprises with trade and industry in one, which won the the title of "Guangdong high-tech enterprises," ,and get strong support from the state.
In recent years, successfully developed Metallic printing technique and offer whole set of production equipment, after our vigorously promote, is now widely implemented to the United Kingdom, Russia and South America and other countries.
UV-LED curing technique is also one of the hi-tech technology developed by YC,which solves the limitation of the past nature drying ink and glue drying drying slow, LED curing is speed up the production, e.g. the production speed of 8 hours in the past, now is able to completed dry in less than 10 minutes; Compared to traditional UV drying technology more energy efficient and environmentally friendly.
YC can also help customers customized prints tattoo stickers and Gold decals/Gold decal etc, such as glass cups, bottles / wine bottles, thermos cup, gift boxes, sports equipment decals and so on.
LED curing non-treatment screen printing ink for plastic including PET / PVC / ABS / acrylic etc, and metal, painted surface, ect. Dry faster, stronger adhesion.
 

 

Our main product: UV-LED curing equipment,Rolling heat stamping equipment,pre-press printing equipment- printing equipment- postpress equipment,and all kinds of silk screen printing material, Water transfer ink and material, rolling-heat stamping materials and other printing supplies etc.
Company honor and certificate : "Shunde network operators Association unit", "Alibaba B2B cross-border electricity business demonstration base","Guangdong high - tech enterprises","ISO9001:2008 certification".
YC company to provide customers with technology solutions, after years of operation down, has become a low-temperature water transfer industry leader.And always uphold the highest product quality and customer-oriented service principle,Adhere to the "professional, focused, efficient and good faith" business philo-sophy ,We will be the advantage of the price suppliesing high value-added,high-performance professional products,consummated pre-sale,after service and technical support,do the best to create unlimited value for our customers.